HP Color LaserJet Enterprise flow MFP M880 Hole Punch Kit Installation Guide - Page 2

Lift the latch assembly straight up to release it, and then rotate

Get HP Color LaserJet Enterprise flow MFP M880 PDF manuals and user guides View all HP Color LaserJet Enterprise flow MFP M880 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

3 4  Before proceeding, take note of the two locator pins on the back side of each cover. These pins must be correctly installed to assure proper alignment of the covers when they are reinstalled.  Remove the covers (callout 1) by moving the top of the cover outward to release the positioning pins (callout 2). TIP: As the cover is removed, you might need to reach behind the cover to release the two locator pins on the back side of the cover. 5 6    Remove four screws from the latch assembly. 7   Lift the latch assembly straight up to release it, and then rotate the assembly away from the paper path entrance to remove it. 8  Remove one screw (callout 1) on the right side of the punch lower front cover assembly (callout 2). 2 Open the front door, and then release one tab (callout 1).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
2
7
5
8
6
4
3
±
²
±
±
²
±
²
±
Remove the covers (callout 1) by moving the top of the cover
outward to release the positioning pins (callout 2). TIP: As the
cover is removed, you might need to reach behind the cover to
release the two locator pins on the back side of the cover.
Before proceeding, take note of the two locator pins on the back
side of each cover. These pins must be correctly installed to
assure proper alignment of the covers when they are reinstalled.
Remove four screws from the latch assembly.
Lift the latch assembly straight up to release it, and then rotate
the assembly away from the paper path entrance to remove it.
Remove one screw (callout 1) on the right side of the punch
lower front cover assembly (callout 2).
Open the front door, and then release one tab (callout 1).