HP Color LaserJet Enterprise flow MFP M880 Hole Punch Kit Installation Guide - Page 3
remove it.
 |
View all HP Color LaserJet Enterprise flow MFP M880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
9 10 Slightly lift up on the cover to release it, and then remove the cover. 11 Remove one screw from the punch rear cover assembly. 12 Slightly lift up on the cover to release it, and then remove the cover. 13 Open the punch door. 14 Pull the punch waste box straight out of the punch assembly to remove it. 3 Raise the punch upper cover, and then open the front door.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10
-
11
-
12
 |
 |
3
11
13
9
12
14
10
±
²
Slightly lift up on the cover to release it, and then remove
the cover.
Remove one screw from the punch rear cover assembly.
Slightly lift up on the cover to release it, and then remove
the cover.
Open the punch door.
Pull the punch waste box straight out of the punch assembly to
remove it.
Raise the punch upper cover, and then open the front door.