HP Color LaserJet Enterprise flow MFP M880 Hole Punch Kit Installation Guide - Page 9

10 LED601 LED602 Blinking one time Blinking two times Blinking three times Blinking four times Not lit Blinking steadily LED blinking pattern explanation Not applicable 2/3 punch hole assembly selected 2/4 punch hole assembly selected Waiting for type setting completion Type setting completed 11 Follow these steps to set the punch hole assembly type. a. Press SW602 and observe the blinking pattern of LED601 and LED602. The table above explains the different blinking patterns. b. Continue pressing SW602 until the blinking pattern matches the type of punch hole assembly you are installing. For example, if you are installing a 2/4 punch hole assembly (part number CZ999-67902), press SW602 until both LED601 and LED602 blink three times. c. Once the LEDs are blinking in the correct pattern, press SW603 to store the punch hole assembly type value in memory. d. Wait until LED601 is not lit and LED602 is blinking steadily to indicate the type setting is complete. e. Press either SW602 or SW603. f. Wait until only LED602 is blinking. 12 ON 1234 Return all of the switches on SW601 to the OFF position. Turn the product off. 9