HP DL580 ProLiant DL580 Generation 4 Maintenance and Service Guide - Page 40
Removing the expansion slot cover
UPC - 882780616011
View all HP DL580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
6. Remove the PCI retaining clip. To replace the component, reverse the removal procedure. Removing the expansion slot cover 1. Power down the server (on page 29). 2. Extend or remove the server from the rack ("Extending the server from the rack" on page 27, "Remove the server from the rack" on page 29). 3. Remove the access panel ("Removing the access panel" on page 29). 4. Remove the screw, and remove the expansion slot cover. CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots have either an expansion slot cover or an expansion board installed. Removal and replacement procedures 40
Removal and replacement procedures
40
6.
Remove the PCI retaining clip.
To replace the component, reverse the removal procedure.
Removing the expansion slot cover
1.
Power down the server (on page
29
).
2.
Extend or remove the server from the rack ("
Extending the server from the rack
" on page
27
,
"
Remove the server from the rack
" on page
29
).
3.
Remove the access panel ("
Removing the access panel
" on page
29
).
4.
Remove the screw, and remove the expansion slot cover.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all PCI slots have either an expansion slot cover or an expansion board installed.