HP DL580 ProLiant DL580 Generation 4 Maintenance and Service Guide - Page 41
Removing a non-hot-plug expansion board, Removing the PCI-X Hot Plug basket
UPC - 882780616011
View all HP DL580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Removing a non-hot-plug expansion board 1. Power down the server (on page 29). 2. Extend or remove the server from the rack ("Extending the server from the rack" on page 27, "Remove the server from the rack" on page 29). 3. Remove the access panel ("Removing the access panel" on page 29). 4. Disconnect any required internal or external cables from the expansion board. 5. Open the PCI latch. 6. Unlock the retaining clip. 7. Remove the expansion board. To replace the component, reverse the removal procedure. Removing the PCI-X Hot Plug basket 1. Power down the server (on page 29). 2. Extend or remove the server from the rack ("Extending the server from the rack" on page 27, "Remove the server from the rack" on page 29). 3. Remove the access panel ("Removing the access panel" on page 29). CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all expansion slots have either an expansion slot cover or an expansion board installed. 4. Remove the expansion board from the slot, if installed. Removal and replacement procedures 41