HP DL580 ProLiant DL580 Generation 4 Maintenance and Service Guide - Page 66
Replace the DIMM, Removing DIMMs
UPC - 882780616011
View all HP DL580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
3. Use the ejector lever to pull the memory board out of the server. 4. Open the memory board. 5. Replace the DIMM ("Removing DIMMs" on page 68). IMPORTANT: Be sure to observe all DIMM installation requirements for the desired memory mode. 6. Close the memory board. IMPORTANT: Be sure that the locking switch is unlocked. The memory board will not seat in the server if the locking switch is locked. Removal and replacement procedures 66
Removal and replacement procedures
66
3.
Use the ejector lever to pull the memory board out of the server.
4.
Open the memory board.
5.
Replace the DIMM ("
Removing DIMMs
" on page
68
).
IMPORTANT:
Be sure to observe all DIMM installation requirements for the desired memory
mode.
6.
Close the memory board.
IMPORTANT:
Be sure that the locking switch is unlocked. The memory board will not seat in
the server if the locking switch is locked.