HP Dc5750 HP Compaq dc5750 Business PC Service Reference Guide, 1st Edition - Page 87
Connecting Optical Drive Cables, Serial and Parallel ATA Drive Guidelines and Features
UPC - 883585056446
View all HP Dc5750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 2. Slide the drive into the drive bay, making sure to align the guide sctrews with the guide slots, until the drive snaps into place. 3. Reconnect the power and data cables to the drive as shown in the following illustrations. ✎ Refer to Chapter 4, "Serial and Parallel ATA Drive Guidelines and Features" for information on attaching the cabling to get optimum performance. Connecting Optical Drive Cables ✎ Some products use straight cable connectors while others use right angle connectors. Service Reference Guide, dc5750 437963-001 6-19
Service Reference Guide, dc5750
437963-001
6–19
Removal and Replacement Procedures— Microtower (MT) Chassis
2.
Slide the drive into the drive bay, making sure to align the guide sctrews with the guide slots,
until the drive snaps into place.
3. Reconnect the power and data cables to the drive as shown in the following illustrations.
✎
Refer to
Chapter 4, “Serial and Parallel ATA Drive Guidelines and Features”
for information on
attaching the cabling to get optimum performance.
Connecting Optical Drive Cables
✎
Some products use straight cable connectors while others use right angle connectors.