HP Dc5750 HP Compaq dc5750 Business PC Service Reference Guide, 1st Edition - Page 95
Front I/O Panel Housing Assembly,
UPC - 883585056446
View all HP Dc5750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 6.12 Front I/O Panel Housing Assembly 1. Prepare the computer for disassembly (Section 6.1). 2. Remove the access panel and rotate the computer so the system board is parallel to the table to make it easier to work on (Section 6.3). 3. Remove the hard drive cables from the plastic shroud at the front of the chassis and from the hard drives. 4. Remove the shroud from the chassis (Section 6.11). 5. Disconnect the power switch/LED cable, the front USB cable, and the front audio cable from the system board. 6. Remove the single screw that secure the housing to the chassis 1, then push the housing to the inside of the chassis 2. To install the housing assembly, reverse the removal procedures. ✎ When installing the housing, insert the power-button end into the opening and then rotate the USB end into position before inserting the retaining screw. Service Reference Guide, dc5750 437963-001 6-27