HP Dc5750 HP Compaq dc5750 Business PC Service Reference Guide, 1st Edition - Page 91
installing a secondary hard drive use the power cable labeled P4., If installing a new drive
UPC - 883585056446
View all HP Dc5750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 10. Slide the drive into the drive bay, making sure to align the guide scews with the guide slots, ubtil the drive snaps into place. The upper bay is for the primatry hard drive. The bottom bay is for the optional secondary hard drive. 11. Connect the power 1 and data 2 cables to the back of the hard drive. ✎ If you are installing a primary hard drive, use the power connector labeled P5. If you are installing a secondary hard drive use the power cable labeled P4. 12. If installing a new drive, connect the oppposite end of the data cable to the appropriate system board connector. Service Reference Guide, dc5750 437963-001 6-23
Service Reference Guide, dc5750
437963-001
6–23
Removal and Replacement Procedures— Microtower (MT) Chassis
10. Slide the drive into the drive bay, making sure to align the guide scews with the guide slots,
ubtil the drive snaps into place. The upper bay is for the primatry hard drive. The bottom bay
is for the optional secondary hard drive.
11. Connect the power 1 and data 2 cables to the back of the hard drive.
✎
If you are installing a primary hard drive, use the power connector labeled P5. If you are
installing a secondary hard drive use the power cable labeled P4.
12. If installing a new drive, connect the oppposite end of the data cable to the appropriate
system board connector.