HP Deskpro ap230 Compaq Deskpro Workstation AP230 Hardware Reference Guide
HP Deskpro ap230 Manual
View all HP Deskpro ap230 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Deskpro ap230 manual content summary:
- HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 1
Hardware Reference Guide Compaq Deskpro Workstation AP230 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 2
consent from Compaq Computer Corporation. COMPAQ, the Compaq logo, and Deskpro Registered in U.S. Patent and Trademark Office. Microsoft, Windows, Windows loss of information. Hardware Reference Guide Compaq Deskpro Workstation AP230 First Edition (March 2001) Part Number 233953-001 Compaq - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 3
the Computer 1-2 Compaq Configuration Record Utility 1-3 chapter 2 Hardware Upgrades Serviceability Features...2-1 Removing the Computer Access Panel 2-1 Removing the Front Bezel 2-3 C-2 Cabling for Optional SCSI Devices C-4 Using SCSISelect with SCSI Devices C-5 Hardware Reference Guide iii - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 4
appendix D Battery Replacement...D-1 appendix E Security Lock Provisions Installing a Cable Lock ...E-1 appendix F Electrostatic Discharge Preventing Electrostatic Damage F-1 Grounding Methods ...F-2 appendix G Routine Computer Care and Shipping Preparation Routine Computer Care ...G-1 CD-ROM Drive - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 5
1 chapter INSTALLATION GUIDELINES This guide explains how to remove the computer cover or access panel and install battery This chapter includes information about the general installation sequence for Compaq Deskpro Workstations, and about when to reconfigure the computer to ensure that it recognizes - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 6
the computer cover or access panel. 4. Install any optional equipment. Refer to the applicable sections of this guide or to the documentation provided with the optional equipment for instructions. 5. Replace the computer cover. 6. Turn on the monitor, computer, and any devices you want to test - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 7
not automatically detected after installation, follow these instructions: In Windows 95 and later operating systems, icon in the Control Panel and follow the instructions on the screen. To reconfigure the useful in troubleshooting computer problems, and streamlines the service process by - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 8
Features Your computer includes features that make it easier to upgrade and service. Removing the Computer Access Panel Before removing the access panel, lay the computer down on its large . 3. Loosen the two screws that secure the access panel to the computer chassis. Hardware Reference Guide 2-1 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 9
4. Slide the access panel back about 1 inch (2.5 cm), then lift it up and off the unit. Removing the Computer Access Panel To replace the access panel, reverse steps 1-4. 2-2 Hardware Upgrades - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 10
bezel, ensure that the bottom hinge points are properly placed in the chassis before rotating the front bezel back into its original position. Hardware Reference Guide 2-3 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 11
Removing Bezel Blanks 1. Shut down the operating system properly, then turn off the computer and any external devices. Disconnect the power cord from the power outlet and disconnect any external devices. 2. Remove the computer access panel. 3. Remove the front bezel. 4. Gently pull the subpanel, - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 12
drive should always be placed in the bay nearest the internal 3.5-inch drives in the minitower configuration for proper clearance within the chassis. Hardware Reference Guide 2-5 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 13
Installing a Drive in the Minitower Configuration 8. Gently slide the drive into the bay. When the drive is properly inserted, the drivelock will secure it. CAUTION: The use of unnecessary force may result in damage to the drives. 9. Reconnect all power and data cables to the drives in the 5.25-inch - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 14
Changing from a Desktop to a Minitower Configuration 11. Replace the subpanel, front bezel, and the computer access panel. 12. Reconnect the external equipment. Hardware Reference Guide 2-7 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 15
Changing from a Minitower to a Desktop Configuration 1. Shut down the operating system properly, then turn off the computer and any external devices. Disconnect the power cord from the power outlet and disconnect any external devices. 2. Remove the computer access panel. 3. Remove the front bezel. - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 16
force may result in damage to the drives. 9. Reconnect all power and data cables to the drives in the 5.25-inch drive bays. Hardware Reference Guide 2-9 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 17
10. Remove the subpanel as described in the section "Removing Bezel Blanks" and reposition it with the bezel blanks in the proper orientation for the desktop configuration . CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 18
3) Internal hard drive bays (bays 4 and 5) Extra drive mounting screws The number and position of expansion slots may vary by model, as shown. Hardware Reference Guide 2-11 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 19
DIMMs must be industry-standard 168-pin, unbuffered PC100- or PC133- compliant SDRAM DIMMs, depending on the model. The SDRAM DIMMs must support CAS Latency 2 or 3 (CL = 2 or CL = 3). They must also contain the mandatory Joint Electronic Device Engineering Council (JEDEC) Serial Presence Detect (SPD - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 20
on the memory socket. Push the module down into the socket, ensuring that the module is fully inserted and properly seated . Installing a DIMM Hardware Reference Guide 2-13 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 21
Installing or Removing an Expansion Card Your computer contains expansion slots, as shown in the "Internal Components" section of this chapter. Removing an Expansion Slot Cover 1. Shut down the operating system properly, then turn off the computer and any external devices, then disconnect the power - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 22
installing a new expansion card, skip to step 11. 10. To install a new expansion card in an open slot, remove the expansion slot cover. Hardware Reference Guide 2-15 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 23
11. Slide the expansion card into the expansion slot and press it firmly into place. Removing or Installing an Expansion Card When you install an expansion card, make sure you press firmly on the card so that the whole connector seats properly in the expansion card slot. 12. Replace the - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 24
Computer Setup. Refer to Appendix B, "Computer Setup Utilities," for more information. ✎ Drive bay numbers are stamped on the chassis, behind the front bezel. Hardware Reference Guide 2-17 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 25
Installing Additional Drives The computer supports up to five drives which may be installed in a half-height bay. You must install guide screws to ensure the drive will line up correctly in the drive cage. Compaq has provided extra guide screws, installed in the front of the computer chassis - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 26
devices, disconnect the power cord from the power outlet, and remove the computer access panel. 2. Install two guide screws on each side of the drive . Some options use metric hardware. Extra guide screws are provided on the front of the chassis, under the front bezel. The Compaq-supplied metric - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 27
4. Connect the drive power and signal cables and, if it is a CD-ROM, DVD-ROM, or PD-CD drive and if analog audio is preferred to digital audio, connect the audio cable . The other end of the audio cable should be connected to the embedded audio connector on the system board. Connecting the - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 28
from the power outlet, and remove the computer access panel. 2. Remove the front bezel. 3. Install one guide screw on the right side of the drive. 4. Insert the drive into the adapter so that the guide screw aligns in the slot, and then attach with two retaining screws. 5. Snap on the brace - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 29
6. Install two guide screws on each side of the adapter . 7. Install the adapter in the desired drive bay bottom bay in the minitower configuration and the topmost bay in the desktop configuration. Aligning the Guide Screws and Installing an Adapter with a 3.5-Inch Drive 2-22 Hardware Upgrades - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 30
"Removing Bezel Blanks.") 10. Replace the computer access panel. 11. Reconfigure the computer, if necessary. Refer to Chapter 1, "Installation Guidelines," for more information. Hardware Reference Guide 2-23 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 31
Removing a Drive from the Drive Bay 1. Shut down the operating system properly, then turn off the computer, disconnect the power cord from the power outlet, and remove the computer access panel. 2. Remove the front bezel. 3. Disconnect the drive power and signal cables and, if it is a CD-ROM, DVD- - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 32
5. While pressing the drivelock, pull the drive out of the drive bay. Removing a Drive from the 5.25-Inch Drive Bay 6. Remove the drive from the drive bay and store in anti-static packaging. Hardware Reference Guide 2-25 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 33
appendix A SPECIFICATIONS Compaq Deskpro Workstation AP230 Desktop Dimensions Height Width Depth Minitower Dimensions Height Width Depth Approximate Weight Weight Supported (maximum distributed load) -264 VAC 200-240 VAC 50-60 Hz 200 W 3 A 265 kg-cal/hr 133 kg-cal/hr Hardware Reference Guide A-1 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 34
or LS-120 drives. Configure Quiet Drive options (for drives that support this feature). Enable Quick Boot, which is faster than Full Boot but error occurs, the error is displayed regardless of the mode selected. To manually switch to Post Messages Enabled during POST, press any key (except F10 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 35
Enter the Asset Tag or property identification number assigned by your company to this computer. Enable power-on password prompting during system restarts (warm boots) as well as during power-on. Establish a setup password that controls access to Computer Setup (F10) and the settings - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 36
have already applied changes you now want to eliminate, select Set Defaults and Exit. This option will restore the original factory system defaults. Hardware Reference Guide B-3 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 37
Changes and Exit Exits Computer Setup without applying or saving any changes. Save Changes and Exit Saves changes to system configuration and exits Computer Setup. Support for Computer Setup options may vary depending on your specific hardware configuration. Continued B-4 Computer Setup - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 38
(IDE devices only) Specifies the active data transfer mode. Options (subject to device capabilities) are PIO 0, Max PIO, Enhanced DMA, Ultra DMA 0, and Max UDMA. Support for Computer Setup options may vary depending on your specific hardware configuration. Continued Hardware Reference - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 39
during operation. When set to Quiet, the drive will not operate at maximum performance. If the drive does not support Quiet mode, the Quiet Drive option will not be displayed. Support for Computer Setup options may vary depending on your specific hardware configuration. Continued B-6 Computer Setup - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 40
Boot, the computer will restart. Turn the computer off, then on, manually. Removable Media Write Enables/disables ability to write data to removable media. Note in order to use the diskette. Support for Computer Setup options may vary depending on your specific hardware configuration - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 41
on the screen. When POST is completed, a list of bootable devices is displayed. Use the arrow keys to select a device and press the Enter key. Support for Computer Setup options may vary depending on your specific hardware configuration. Continued B-8 Computer Setup - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 42
some Compaq remote security tools. See the Troubleshooting Guide for more information. Power-On Password Allows you to set and enable power-on been removed. Feature supported on select models only. See the Desktop Management Guide for more information. Support for Computer Setup options - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 43
attempt to update the MBR. If MBR Security is enabled and disk accesses are being serviced by the BIOS, write requests to the MBR are rejected, causing the utilities to of the MBR was saved Support for Computer Setup options may vary depending on your specific hardware configuration. Continued - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 44
ports and audio security. Network Service Boot Enables/disables the computer's byte identifier displayed during POST) See the Desktop Management guide for more information • chassis serial number or Universal for System ID entry Support for Computer Setup options may vary depending - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 45
available under ACPI-enabled operating systems. Timeouts Allows you to disable or manually select timeout values for the system and/or all attached IDE hard drives not appear if the energy saver mode is disabled. Support for Computer Setup options may vary depending on your specific hardware configuration - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 46
installed PCI devices and their IRQ settings. • Allows you to reconfigure IRQ settings for these devices or to disable them entirely. Support for Computer Setup options may vary depending on your specific hardware configuration. * These options should be used by advanced users only. continued - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 47
are multiple PCI video adapters in the system. Allows users to specify which VGA controller will be the "boot" or primary VGA controller. Support for Computer Setup options may vary depending on your specific hardware configuration. * These options should be used by advanced users only. B-14 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 48
on the primary controller, you must use an 80 conductor Ultra ATA cable for optimal performance. This cable is standard on select models. Hardware Reference Guide C-1 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 49
Select models feature a Wide Ultra2 SCSI host adapter that supports up to fifteen wide internal and external SCSI devices. , you must adhere to the following guidelines: The Wide Ultra2 SCSI host adapter supports up to 15 wide SCSI devices. Every SCSI device must have a unique identification - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 50
a unique SCSI ID number. Second, you must determine if the device ought to have termination enabled or disabled. Set the termination if necessary. Hardware Reference Guide C-3 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 51
Cabling for Optional SCSI Devices Depending on the model, your computer may include one of the SCSI cables shown in the next illustration. SCSI Cable Options Because your computer comes preconfigured, cable configuration does not become a consideration until you decide to add an optional SCSI device - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 52
documentation that comes with the device or contact your Compaq authorized dealer, reseller, or service provider. Using SCSISelect with SCSI Devices The Wide Ultra2 SCSI host adapter includes the message display status, refer to Appendix B, "Computer Setup Utilities." Hardware Reference Guide C-5 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 53
, and remove the computer cover or access panel. It may be necessary to remove an expansion card to gain access to the battery. Hardware Reference Guide D-1 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 54
3. Locate the battery and battery holder on the system board, as shown in the following illustration. Battery and Battery Holder 4. Lift the battery out of its holder. Removing the Coin Cell Battery 5. Slide the replacement battery into position, positive side up. The battery holder automatically - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 55
Setup Utilities." If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor. Hardware Reference Guide D-3 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 56
lock can be purchased from Kensington Microware Limited or Compaq authorized dealers, resellers, and service providers. Ask for the Kensington MicroSaver Security System, Model 64068. 1. Loop the cable computer and lock with the key. Compaq Deskpro Workstation AP230 Hardware Reference Guide E-1 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 57
and storing products in static- safe containers. Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations. Place parts on a grounded surface before removing them from their containers. Avoid touching pins, leads, or circuitry. Always be - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 58
the skin. Use heelstraps, toestraps, or bootstraps at standing workstations. Wear the straps on both feet when standing on conductive floors or dissipating floor mats. Use conductive field service tools. Use a portable field service kit with a folding static-dissipating work mat. If you do - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 59
extremes of heat and cold. For information about the recommended temperature and humidity ranges for your computer, refer to Appendix A, "Specifications," in this guide. Keep liquids away from the computer and keyboard. Never cover the ventilation slots on the monitor with any type of material - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 60
damage the finish. Safety If any object or liquid falls into the drive, immediately unplug the computer and have it checked by an authorized Compaq service provider. G-2 Routine Computer Care and Shipping Preparation - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 61
in their original packing boxes or similar packaging with sufficient packing material to protect them. For environmental nonoperating ranges, refer to Appendix A, "Specifications," in this guide. Hardware Reference - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 62
minitower configuration changing to desktop, 2-8 O optional equipment adding or removing, 1-2 P PD-CD drive, installing, 2-19 Plug and Play, 1-3 power supply, 2-11 processor, 2-11 Hardware Reference Guide I-1 - HP Deskpro ap230 | Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 63
S screws, 2-11 setup utility, B-1 slot cover, expansion, 2-14 subpanel, removing, 2-4 system configuration, 1-2, B-1 T tape drive, installing, 2-19 U utilities, Computer Setup, B-1 I-2 Index
Compaq Confidential - Need to Know Required
Hardware Reference Guide
Compaq Deskpro
Workstation AP230