HP Deskpro ap230 Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 28
Installing a 3.5-Inch Drive into a 5.25-Inch Drive Bay, the slot
View all HP Deskpro ap230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing a 3.5-Inch Drive into a 5.25-Inch Drive Bay 1. Shut down the operating system properly, then turn off the computer and any external drives, disconnect the power cord from the power outlet, and remove the computer access panel. 2. Remove the front bezel. 3. Install one guide screw on the right side of the drive. 4. Insert the drive into the adapter so that the guide screw aligns in the slot, and then attach with two retaining screws. 5. Snap on the brace , and attach the drive bezel to the front of the adapter. Attaching a 3.5-Inch Drive to the 5.25-Inch Adapter Hardware Reference Guide 2-21
Hardware Reference Guide
2-21
Compaq Confidential - Need to Know Required
Installing a 3.5-Inch Drive into a 5.25-Inch Drive Bay
1.
Shut down the operating system properly, then turn off the
computer and any external drives, disconnect the power cord from
the power outlet, and remove the computer access panel.
2.
Remove the front bezel.
3.
Install one guide screw on the right side of the drive.
4.
Insert the drive into the adapter
so that the guide screw aligns in
the slot, and then attach with two retaining screws.
5.
Snap on the brace
, and attach the drive bezel
to the front of
the adapter.
Attaching a 3.5-Inch Drive to the 5.25-Inch Adapter