HP Deskpro ap230 Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 20
WARNING, the sockets.
View all HP Deskpro ap230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Shut down the operating system properly, then turn off the computer and any external devices, then disconnect the power cord from the power outlet. 3. Remove the access panel and locate the memory module sockets. ! WARNING: To reduce risk of personal injury from hot surfaces, allow the internal system components to cool before touching. 4. Open both latches of the memory module socket , and insert the memory module into the socket . Begin by installing a module into the socket nearest the preinstalled module, and install the modules following the numerical order of the sockets. A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. Push the module down into the socket, ensuring that the module is fully inserted and properly seated . Installing a DIMM Hardware Reference Guide 2-13