HP Deskpro ap230 Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 29
The primary 3.5-inch diskette drive should only be installed
View all HP Deskpro ap230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
6. Install two guide screws on each side of the adapter . 7. Install the adapter in the desired drive bay by sliding it into the front of the drive cage; the drivelock automatically secures the adapter when it snaps into place. The primary 3.5-inch diskette drive should only be installed into bay 3. Bay 3 is the bottom bay in the minitower configuration and the topmost bay in the desktop configuration. Aligning the Guide Screws and Installing an Adapter with a 3.5-Inch Drive 2-22 Hardware Upgrades
2-22
Hardware Upgrades
Compaq Confidential - Need to Know Required
6.
Install two guide screws on each side of the adapter
.
7.
Install the adapter in the desired drive bay
by sliding it into the
front of the drive cage; the drivelock automatically secures the
adapter when it snaps into place.
The primary 3.5-inch diskette drive should only be installed
into bay 3. Bay 3 is the bottom bay in the minitower
configuration and the topmost bay in the desktop configuration.
Aligning the Guide Screws and Installing an Adapter with a 3.5-Inch Drive