HP Deskpro ap230 Compaq Deskpro Workstation AP230 Hardware Reference Guide - Page 27

Remove the appropriate bezel blank from the subpanel inside the, audio connector on the system board.

Page 27 highlights

  4. Connect the drive power and signal cables and, if it is a CD-ROM, DVD-ROM, or PD-CD drive and if analog audio is  preferred to digital audio, connect the audio cable . The other  end of the audio cable should be connected to the embedded audio connector on the system board. Connecting the Drive Cables 5. Remove the appropriate bezel blank from the subpanel inside the front bezel. Refer to the section "Removing Bezel Blanks" for more information. 6. Replace the computer access panel. 7. Reconfigure the computer, if necessary. Refer to Chapter 1, "Installation Guidelines," for more information. 2-20 Hardware Upgrades

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63

2-20
Hardware Upgrades
Compaq Confidential - Need to Know Required
4.
Connect the drive power
and signal
cables and, if it is a
CD-ROM, DVD-ROM, or PD-CD drive and if analog audio is
preferred to digital audio, connect the audio cable
. The other
end of the audio cable
should be connected to the embedded
audio connector on the system board.
Connecting the Drive Cables
5.
Remove the appropriate bezel blank from the subpanel inside the
front bezel. Refer to the section “Removing Bezel Blanks” for
more information.
6.
Replace the computer access panel.
7.
Reconfigure the computer, if necessary. Refer to Chapter 1,
“Installation Guidelines,” for more information.