HP Deskpro ap250 Compaq Deskpro Workstation AP250 Hardware Reference Guide - Page 33

Removing an Expansion Board, Recon the workstation, if necessary.

Get HP Deskpro ap250 PDF manuals and user guides View all HP Deskpro ap250 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

4. Slide the expansion board into the expansion slot and press the board firmly into place. When installing an expansion board, press firmly on the board so that the whole connector seats properly in the expansion board slot. Installing an expansion board 5. Replace the screw at the side of the expansion slot. 6. Replace the workstation access panel. 7. Connect external cables to the installed board, if necessary. 8. Plug the power cord back into the grounded AC outlet. 9. Turn on the system. 10. Reconfigure the workstation, if necessary. Removing an Expansion Board Reverse the steps in the previous section to remove an expansion board. When reversing these steps: ❏ Be sure to store the board in antistatic packaging. ❏ Install an expansion slot cover to close the open slot. 2-18 Hardware Upgrades

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
2-18
Hardware Upgrades
Compaq Confidential - Need to Know Required
4.
Slide the expansion board into the expansion slot and press the
board firmly into place.
When installing an expansion board, press firmly on the board so
that the whole connector seats properly in the expansion board
slot.
Installing an expansion board
5.
Replace the screw at the side of the expansion slot.
6.
Replace the workstation access panel.
7.
Connect external cables to the installed board, if necessary.
8.
Plug the power cord back into the grounded AC outlet.
9.
Turn on the system.
10.
Reconfigure the workstation, if necessary.
Removing an Expansion Board
Reverse the steps in the previous section to remove an expansion
board. When reversing these steps:
Be sure to store the board in antistatic packaging.
Install an expansion slot cover to close the open slot.