HP Deskpro ap250 Compaq Deskpro Workstation AP250 Hardware Reference Guide - Page 36
Installing a Processor, Attaching the Heatsink to the Processor
View all HP Deskpro ap250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installing a Processor The Compaq Deskpro Workstation AP250 is a one-processor system. To upgrade your existing processor to a faster speed processor, refer to the instructions provided in the following sections. Attaching the Heatsink to the Processor ! WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. CAUTION: Static electricity can damage the electronic components of the workstation. Before beginning these procedures, be sure you are discharged of static electricity by briefly touching a grounded metal object. To attach the heatsink to the processor: 1. Turn off the workstation and disconnect the power cord from the grounded AC outlet and the back of the workstation. 2. Remove the workstation access panel. Refer to Removing the Workstation Access Panel in this chapter. Compaq Deskpro Workstation AP250 Hardware Reference Guide 2-21