HP Deskpro ap250 Compaq Deskpro Workstation AP250 Hardware Reference Guide - Page 35
Installing and Removing an AGP Graphics Controller, installing a full-length expansion board
View all HP Deskpro ap250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installing and Removing an AGP Graphics Controller To install the AGP graphics controller, remove the metal slot screw and cover, insert the board into the AGP slot, and press the board firmly into place. Replace the metal slot screw. See Installing an Expansion Board in this chapter for more information. To ensure the board fits properly, use an AGP graphics controller with an ATX format bracket. When installing an AGP graphics controller, press firmly on the board so that the whole connector seats properly in the AGP slot. If you are installing a full-length expansion board, be sure to engage the card guide. Installing an AGP graphics controller To remove the AGP graphics controller, remove the metal slot screw, hold the board at each end, and then pull up. Be sure to replace the metal slot screw and cover. See Removing an Expansion Board in this chapter for more information. 2-20 Hardware Upgrades