HP Deskpro ap250 Compaq Deskpro Workstation AP250 Hardware Reference Guide - Page 39
Installing the Processor/Heatsink Assembly, WARNING, CAUTION
View all HP Deskpro ap250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Installing the Processor/Heatsink Assembly ! WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. CAUTION: Static electricity can damage the electronic components of the workstation. Before beginning these procedures, be sure you are discharged of static electricity by briefly touching a grounded metal object. To install the processor/heatsink assembly onto the system board: 1. Turn off the workstation and disconnect the power cord from the grounded AC outlet and the back of the workstation. 2. Remove the workstation access panel. Refer to Removing the Workstation Access Panel in this chapter. 3. Slide the processor into the socket. Installing the processor/heatsink assembly onto the system board 2-24 Hardware Upgrades