HP ENVY 13-ab000 Envy Notebook PC model numbers 13-ab001 through 13-ab099; CTO - Page 43

Power connector cable, Remove the three Phillips PM2.5×4.1 screws

Get HP ENVY 13-ab000 PDF manuals and user guides View all HP ENVY 13-ab000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Power connector cable Description Power connector cable Spare part number 808155-017 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 27). 5. Disconnect the battery cable from the system board (see Battery on page 29). Remove the power connector cable: 1. Disconnect the power connector cable (1) from the system board. 2. Remove the three Phillips PM2.5×4.1 screws (2) that secure the power connector cable bracket to the keyboard/top cover. 3. Remove the power connector cable bracket (3). The power connector cable bracket is not spared separately. 4. Remove the power connector cable (4). Reverse this procedure to install the power connector cable. Component replacement procedures 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Power connector cable
Description
Spare part number
Power connector cable
808155-017
Before removing the power connector cable, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
27
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
29
).
Remove the power connector cable:
1.
Disconnect the power connector cable
(1)
from the system board.
2.
Remove the three Phillips PM2.5×4.1 screws
(2)
that secure the power connector cable bracket to
the keyboard/top cover.
3.
Remove the power connector cable bracket
(3)
.
The power connector cable bracket is not spared separately.
4.
Remove the power connector cable
(4)
.
Reverse this procedure to install the power connector cable.
Component replacement procedures
35