HP ENVY 13-ab000 Envy Notebook PC model numbers 13-ab001 through 13-ab099; CTO - Page 45
Phillips PM2.5×4.1 screws, or similar plastic
View all HP ENVY 13-ab000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
7. Remove the five Phillips PM2.5×4.1 screws (3) that secure the display assembly to the keyboard/ top cover. 8. Release the display hinges (1) by swinging them up and back as far as they will go. 9. Swing the front edge of the keyboard/top cover (2) up and back until it rests at an angle. 10. Slide the keyboard/top cover (3) forward and separate it from the display assembly. 11. If it is necessary to replace the display panel assembly or any of the display assembly subcomponents: a. Use a case utility tool (1) or similar plastic, flat-edged tool to separate the top edge of the display panel assembly (2) from the display back cover. Component replacement procedures 37
7.
Remove the
five
Phillips PM2.5×4.1 screws
(3)
that secure the display assembly to the keyboard/
top cover.
8.
Release the display hinges
(1)
by swinging them up and back as far as they will go.
9.
Swing the front edge of the keyboard/top cover
(2)
up and back until it rests at an angle.
10.
Slide the keyboard/top cover
(3)
forward and separate it from the display assembly.
11.
If it is necessary to replace the display panel assembly or any of the display assembly subcomponents:
a.
Use a case utility tool
(1)
or similar plastic,
flat-edged
tool to separate the top edge of the display
panel assembly
(2)
from the display back cover.
Component replacement procedures
37