HP ENVY 13-ab000 Envy Notebook PC model numbers 13-ab001 through 13-ab099; CTO - Page 51
to the display back cover., Remove the horizontal support bracket
View all HP ENVY 13-ab000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
g. Remove the wireless main antenna cable and transceiver (5). The wireless main antenna cable and transceiver are available using spare part numbers 913617-001 (for use only with display panel assemblies with spare part numbers 909632-001, 912753-001, 912754-001, and 912755-001) and 914164-001 (for use only with FHD nonTouchScreen display panel assembly with spare part number 912673-001). 17. If it is necessary to replace the display panel cable: a. Remove the display panel assembly. b. Remove the display left hinge. c. Remove the three Phillips PM1.5×2.4 screws (1) that secure the horizontal support bracket and the vertical support bracket to the display back cover. d. Release the retention tape (2) that secures the vertical support bracket and the display panel cable to the display back cover. e. Remove the horizontal support bracket (3). f. Remove the vertical support bracket (4). g. Disconnect the webcam/microphone module cable (5) from the webcam/microphone module. h. Release the display panel cable from the retention clips (6) and routing channel built into the display back cover. i. Remove the display panel cable (7). The display panel cable is available using the following spare part numbers: ● 909626-001 - For use only with QHD+ TouchScreen display panel assembly with spare part number 909632-001 ● 909625-001 - For use only with QHD+ non-TouchScreen display panel assembly with spare part number 912753-001 Component replacement procedures 43