HP ENVY 13-ay0000 Maintenance and Service Guide - Page 46
Fan, from the system board.
View all HP ENVY 13-ay0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Fan Table 5-5 Fan spare part information Description Fan (includes cable) Spare part number L94511-001 Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). Remove the fan: 1. Disconnect the battery cable from the system board. 2. Disconnect the fan cable (1) from the system board. 3. Remove the cover (2) that secures the WLAN antenna cables to the WLAN module. The WLAN module cover is available using spare part number L98315-005. 4. Remove the two Phillips M2.0×4.0 screws (3) that secure the fan to the system board. 38 Chapter 5 Removal and replacement procedures