HP ENVY 13-ay0000 Maintenance and Service Guide - Page 60
Power connector cable, Remove the display assembly see
![]() |
View all HP ENVY 13-ay0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Power connector cable Table 5-6 Power connector cable spare part information Description Power connector cable Spare part number L94512-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). 5. Remove the display assembly (see Display assembly on page 40). Remove the power connector cable: 1. Disconnect the power connector cable (1) from the system board. 2. Remove the power connector cable (2). Reverse this procedure to install the power connector cable. 52 Chapter 5 Removal and replacement procedures
![](/manual_guide/products/hewlettpackard-envy-13ay0000-maintenance-service-guide-bec932a/60.png)