HP ENVY 15-ae100 ENVY Notebook PC Maintenance and Service Guide - Page 63
Hard drive, Remove the battery see
View all HP ENVY 15-ae100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket or hard drive connector cable. The hard drive bracket and screws are included in the Hard Drive Hardware Kit, spare part number 812686-001. The hard drive cable is available using spare part number 812697-001. Description 2.0 TB, 5400 rpm, 9.5-mm 1.0 TB, 5400 rpm + 8 GB NAND hybrid, 9.5 mm 1.0 TB, 5400 rpm, 9.5-mm 750 GB, 5400 rpm, 9.5-mm (Best Buy SKUs) 500 GB, 5400 rpm, 7.0-mm Hard Drive Hardware Kit (includes bracket and screws) Hard drive cable Spare part number 801808-005 731999-005 833907-005 778190-005 778186-005 812686-001 812697-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 35). 5. Remove the battery (see Battery on page 54). Remove the hard drive: 1. Disconnect the hard drive cable from the system board (1). 2. Remove the four Phillips PM2.5×3.0 screws (2) that secure the hard drive assembly to the computer. Component replacement procedures 55