HP ENVY 15-ae100 ENVY Notebook PC Maintenance and Service Guide - Page 78
Speaker (rear), Remove the broadhead Phillips PM2.0×2.0 screw
View all HP ENVY 15-ae100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Speaker (rear) Description Speaker Kit Spare part number 812705-001 Before removing the rear speaker, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 35). 5. Remove the battery (see Battery on page 54). 6. Remove the hard drive (see Hard drive on page 55). 7. Remove the system board (see System board on page 66). Remove the rear speaker: 1. Remove the broadhead Phillips PM2.0×2.0 screw (1) that secures the speaker to the computer. NOTE: The speaker includes rubber isolators (2) around the screws. These isolators are crucial to the performance of the speaker. 2. Remove the rear speaker (3). Reverse this procedure to install the rear speaker. 70 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts