HP ENVY 15-ae100 ENVY Notebook PC Maintenance and Service Guide - Page 65
Speakers (front), around the screws. These isolators are crucial to
View all HP ENVY 15-ae100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Speakers (front) Description Speaker Kit Spare part number 812705-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 35). 5. Remove the battery (see Battery on page 54). 6. Remove the hard drive (see Hard drive on page 55). Remove the speakers: 1. Remove the two broadhead Phillips PM2.0×2.0 screws (1) that secure the speaker to the computer. NOTE: The speaker includes rubber isolators (2) around the screws. These isolators are crucial to the performance of the speakers. 2. Remove the speaker cable from its routing path (3). 3. Remove the speaker (4). 4. Disconnect the speaker cable (1) from the system board. Component replacement procedures 57