HP ENVY 15-w000 Maintenance and Service Guide - Page 38
far enough to access the keyboard and touchpad connectors on the system, When you lift the top cover
View all HP ENVY 15-w000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
4. Pry the two screw covers from the middle of the bottom cover (3). Rubber feet and rubber screw covers are available in the Rubber Kit, spare part number 807533-001. 5. Remove the 12 Phillips PM2.5×6.0 screws that secure the top cover to the computer. 6. Position the computer upright, and then open the computer as far as possible. 7. Starting on the inside above the keyboard near the hinges, pull up at the seams to disengage the cover from the computer (1), far enough to access the keyboard and touchpad connectors on the system board. NOTE: When you lift the top cover, the keyboard cable and the touchpad cable are connected to the system board. Be sure not to pull the cables loose when lifting the top cover. 28 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts