HP ENVY 15-w000 Maintenance and Service Guide - Page 67
Power button board, Remove the Phillips PM2.5×3.0 screw
View all HP ENVY 15-w000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Power button board Description Power button board (includes cable) Spare part number 807528-001 Before removing the power button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the top cover (see Top cover on page 27). 5. Remove the system board (see System board on page 39). 6. Remove the display (see Display assembly subcomponents on page 19). Remove the power button board: 1. Remove the Phillips PM2.5×3.0 screw (1) that secures the power button board to the computer. 2. Remove the power button board and cable (2). Reverse this procedure to install the power button board. Component replacement procedures 57