HP ENVY 17-2090nr HP ENVY 17 (model numbers 2000 through 2099) - Maintenance a - Page 60
Top cover, Remove the top cover
View all HP ENVY 17-2090nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
5. Release the ZIF connector (3) to which the keyboard light cable is attached, and then disconnect the keyboard light cable (2) from the system board. 6. Remove the keyboard. Reverse this procedure to install the keyboard. Top cover Description Top cover (includes TouchPad and cable) Spare part number 633853-001 Before removing the top cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the memory module compartment cover (see Memory module on page 42). 6. Remove the keyboard (see Keyboard on page 50). Remove the top cover: 1. Turn the computer upside down, with the front toward you. 2. Remove the four rubber feet (1) from the base enclosure. The rubber feet are included in the Rubber Feet Kit, spare part number 603798-001. 52 Chapter 4 Removal and replacement procedures