HP ENVY 17-2090nr HP ENVY 17 (model numbers 2000 through 2099) - Maintenance a - Page 80
until it rests at a slight angle., Lift the bottom edge of the display bezel/panel assembly
View all HP ENVY 17-2090nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
7. If it is necessary to replace the display enclosure or any of the display assembly internal components: a. Remove the Mylar screw covers (1). The screw covers are included in the Display Screw Kit, spare part number 603776-001. b. Remove the two Phillips PM2.5×5.0 screws (2) that secure the display enclosure to the display assembly. c. Lift the bottom edge of the display bezel/panel assembly (1) until it rests at a slight angle. d. Disconnect the logo light cable (2) from the display panel cable. e. Release the wireless antenna cables (3) from the right display hinge. 72 Chapter 4 Removal and replacement procedures
7.
If it is necessary to replace the display enclosure or any of the display assembly internal
components:
a.
Remove the Mylar screw covers
(1)
. The screw covers are included in the Display Screw Kit,
spare part number 603776-001.
b.
Remove the two Phillips PM2.5×5.0 screws
(2)
that secure the display enclosure to the
display assembly.
c.
Lift the bottom edge of the display bezel/panel assembly
(1)
until it rests at a slight angle.
d.
Disconnect the logo light cable
(2)
from the display panel cable.
e.
Release the wireless antenna cables
(3)
from the right display hinge.
72
Chapter 4
Removal and replacement procedures