HP ENVY m4-1002xx HP ENVY m4 Notebook PC Maintenance and Service Guide - Page 41

hard drive., Remove the four Phillips PM3.0×3.3 screws

Get HP ENVY m4-1002xx PDF manuals and user guides View all HP ENVY m4-1002xx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

6. Remove the four Phillips PM2.0×4.5 screws (2) that secure the hard drive to the computer. 7. Use the hard drive tab (3) to remove the hard drive by lifting it straight up and away from the computer. 8. If it is necessary to disassemble the hard drive, perform the following steps: a. Position the hard drive with the connector toward you. b. Disconnect the hard drive connector cable (1) from the hard drive. c. Remove the four Phillips PM3.0×3.3 screws (2) that secure the hard drive bracket to the hard drive. d. Remove the hard drive bracket (3) from the hard drive. The hard drive bracket, hard drive connector cable, and screws are available in the Hard Drive Hardware Kit, spare part number 698081-001. Component replacement procedures 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
6.
Remove the four Phillips PM2.0×4.5 screws
(2)
that secure the hard drive to the computer.
7.
Use the hard drive tab
(3)
to remove the hard drive by lifting it straight up and away from
the computer.
8.
If it is necessary to disassemble the hard drive, perform the following steps:
a.
Position the hard drive with the connector toward you.
b.
Disconnect the hard drive connector cable
(1)
from the hard drive.
c.
Remove the four Phillips PM3.0×3.3 screws
(2)
that secure the hard drive bracket to the
hard drive.
d.
Remove the hard drive bracket
(3)
from the hard drive.
The hard drive bracket, hard drive connector cable, and screws are available in the Hard
Drive Hardware Kit, spare part number 698081-001.
Component replacement procedures
33