HP ENVY m4-1002xx HP ENVY m4 Notebook PC Maintenance and Service Guide - Page 52
Release the ZIF connector to which the keyboard backlight cable, then disconnect the keyboard cable
View all HP ENVY m4-1002xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
7. Lift the rear edge of the keyboard (1) until the keyboard rests at an angle, and then swing the top edge of the keyboard (2) up and forward until it rests upside down on the palm rest. 8. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and then disconnect the keyboard cable (2) from the system board. 9. Release the ZIF connector to which the keyboard backlight cable (4) is attached, and then disconnect the keyboard backlight cable (4) from the system board. 44 Chapter 4 Removal and replacement procedures
7.
Lift the rear edge of the keyboard
(1)
until the keyboard rests at an angle, and then swing the top
edge of the keyboard
(2)
up and forward until it rests upside down on the palm rest.
8.
Release the zero insertion force (ZIF) connector
(1)
to which the keyboard cable is attached, and
then disconnect the keyboard cable
(2)
from the system board.
9.
Release the ZIF connector to which the keyboard backlight cable
(4)
is attached, and then
disconnect the keyboard backlight cable
(4)
from the system board.
44
Chapter 4
Removal and replacement procedures