HP ENVY m4-1002xx HP ENVY m4 Notebook PC Maintenance and Service Guide - Page 64
Fan/heat sink assembly, Battery, Hard drive, Optical drive, WLAN module, Keyboard, Top cover
View all HP ENVY m4-1002xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4. Remove the system board (3) by sliding it up and to the right at an angle. 5. Remove the system board. Reverse this procedure to install the system board. Fan/heat sink assembly Description Fan/heat sink assembly (includes replacement thermal material) Spare part number 698079-001 Before removing the fan/heat sink assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery), and then remove the following components: a. Hard drive (see Hard drive) b. Optical drive (see Optical drive) c. WLAN module (see WLAN module) d. Keyboard (see Keyboard) e. Top cover (see Top cover) f. System board (see System board) 56 Chapter 4 Removal and replacement procedures