HP ENVY m4-1002xx HP ENVY m4 Notebook PC Maintenance and Service Guide - Page 48
RTC battery, to remove the RTC battery
View all HP ENVY m4-1002xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
RTC battery Description RTC battery Spare part number 676654-001 Before removing the RTC battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery), and then remove the following components: 5. Remove the service cover (see Hard drive). Remove the RTC battery: ▲ Use a thin, non-conductive tool (1) to remove the RTC battery (2) from the socket on the system board. Reverse this procedure to install the RTC battery. When installing the RTC battery, make sure the "+" sign faces up. 40 Chapter 4 Removal and replacement procedures