HP ENVY m6-1184ca HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 91
Optical drive connector board, Remove the battery see
View all HP ENVY m6-1184ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
2. Lift the processor (2) straight up, and remove it. NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon embossed on the processor socket when you install the processor. Reverse this procedure to install the processor. Optical drive connector board Description Optical drive connector board (includes cable) Spare part number 686899-001 Before removing the optical drive connector board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 47), and then remove the following components: a. Hard drive (see Hard drive on page 48) b. Optical drive (see Optical drive on page 52) c. Keyboard (see Keyboard on page 56) d. Top cover (see Top cover on page 65) Component replacement procedures 83