HP ENVY m6-n113dx HP ENVY m6 Notebook PC HP ENVY Notebook PC Maintenance and S - Page 60
Display assembly, Disconnect all external devices from the computer.
View all HP ENVY m6-n113dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
5. Remove the base enclosure. Reverse this procedure to install the base enclosure. Display assembly Description Spare part number 15.6-in, BrightView, FHD, LED, TouchScreen display assembly for use on all computer models 720550-001 15.6-in, BrightView, HD, LED, TouchScreen display assembly for use on all computer models 720549-001 15.6-in, BrightView, FHD, LED, non-TouchScreen display assembly for use only on computer models equipped with an Intel processor 720552-001 15.6-in, BrightView, HD, LED, non-TouchScreen display assembly for use only on computer models 720551-001 equipped with an Intel processor To remove the display assembly and access the display assembly subcomponents, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 38). 5. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 39). 52 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts