HP ENVY m6-n113dx HP ENVY m6 Notebook PC HP ENVY Notebook PC Maintenance and S - Page 77
until you hear a click., to turn the processor locking screw one-half turn
View all HP ENVY m6-n113dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 38), and then remove the following components: a. Service cover (see WLAN module on page 39) b. Hard drive (see Hard drive on page 42) c. Base enclosure (see Base enclosure on page 49) d. Display assembly (see Display assembly on page 52) e. Fan (see Fan on page 60) f. System board (see System board on page 61) g. Heat sink (see Heat sink on page 66) Remove the processor: 1. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn counterclockwise (2), until you hear a click. 2. Lift the processor (3) straight up, and remove it. NOTE: The gold triangle (4) on the processor must be aligned with the triangle icon embossed on the processor socket when you install the processor. Reverse this procedure to install the processor. Component replacement procedures 69