HP ENVY m6-n113dx HP ENVY m6 Notebook PC HP ENVY Notebook PC Maintenance and S - Page 83

Speakers

Get HP ENVY m6-n113dx PDF manuals and user guides View all HP ENVY m6-n113dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

Speakers Description Speakers (include left and right speakers, 2 cables, and 4 isolators) Spare part number 720561-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 38), and then remove the following components: a. Service cover (see WLAN module on page 39) b. Hard drive (see Hard drive on page 42) c. Base enclosure (see Base enclosure on page 49) Remove the speakers: 1. Disconnect the speaker cable (1) from the system board. 2. Release the speaker cables from the clips (2) and routing channel built into the top cover. 3. Remove the four Phillips PM2.5×6.2 screws (3) that secure the speakers to the top cover. Component replacement procedures 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Speakers
Description
Spare part number
Speakers (include left and right speakers, 2 cables, and 4 isolators)
720561-001
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
38
), and then remove the following components:
a.
Service cover (see
WLAN module
on page
39
)
b.
Hard drive (see
Hard drive
on page
42
)
c.
Base enclosure (see
Base enclosure
on page
49
)
Remove the speakers:
1.
Disconnect the speaker cable
(1)
from the system board.
2.
Release the speaker cables from the clips
(2)
and routing channel built into the top cover.
3.
Remove the four Phillips PM2.5×6.2 screws
(3)
that secure the speakers to the top cover.
Component replacement procedures
75