HP EliteBook Revolve 810 EliteBook Revolve 810 G3 Maintenance and Service Guid - Page 40
Service cover, remove the bezel.
View all HP EliteBook Revolve 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3. Pivot the battery up and back and then remove the battery (2). Reverse this procedure to install the battery. Service cover NOTE: The service cover spare part kit includes 6 captive retention screws and 2 rubber feet. Description With icons Without icons Spare part number 753713-001 799568-001 Before removing the service cover, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29). Remove the service cover: 1. Press on the memory card bezel (1) once to release the bezel, and then press on the bezel again to remove the bezel. 2. Remove the two large rubber screw covers (2). 3. Remove the two small rubber screw covers (3). The large and small rubber screw covers are included in the Plastics/Rubber Kit, spare part number 716744-001. 30 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts