HP EliteBook Revolve 810 EliteBook Revolve 810 G3 Maintenance and Service Guid - Page 50
NFC board, Allow Activation, Save changes and exit
![]() |
View all HP EliteBook Revolve 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3. Clear the Allow Activation check box. 4. Select Save changes and exit. NFC board Description NFC board (includes NFC board cable) Spare part number 801800-001 Before removing the NFC board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29). 5. Remove the service cover (see Service cover on page 30). Remove the NFC board: 1. Release the zero insertion force (ZIF) connector (1) to which the NFC board cable is attached, and then disconnect the NFC board cable from the NFC board (2). 2. Remove the Phillips M1.5×2.0 screw (3) that secures the NFC board to the bottom cover. 3. Detach the NFC board (4) from the bottom cover. (The NFC board is attached to the bottom cover with double-sided tape.) 4. Remove the NFC board and cable. 40 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
![](/manual_guide/products/hewlettpackard-elitebook-revolve-810-elitebook-revolve-810-g3-maintenance-service-guide-935d90d/50.png)