HP EliteBook Revolve 810 EliteBook Revolve 810 G3 Maintenance and Service Guid - Page 41
the service cover, Lift the front edge of the service cover
View all HP EliteBook Revolve 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
4. Remove the two Phillips PM2.0×8.5 screws (4) that secure the service cover to the computer. 5. Loosen the four captive Phillips screws (1) on the front edge of the service cover. 6. Loosen the two captive Phillips screws (2) on the rear edge of the service cover. 7. Lift the front edge of the service cover (3) until the cover detaches from the computer, and then remove the service cover (4) from the computer. Reverse this procedure to install the service cover. Component replacement procedures 31
4.
Remove the two Phillips PM2.0×8.5 screws
(4)
that secure the service cover to the computer.
5.
Loosen the four captive Phillips screws
(1)
on the front edge of the service cover.
6.
Loosen the two captive Phillips screws
(2)
on the rear edge of the service cover.
7.
Lift the front edge of the service cover
(3)
until the cover detaches from the computer, and then remove
the service cover
(4)
from the computer.
Reverse this procedure to install the service cover.
Component replacement procedures
31