HP EliteBook Revolve 810 EliteBook Revolve 810 G3 Maintenance and Service Guid - Page 54
Bottom cover, Remove the bottom cover
View all HP EliteBook Revolve 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Reverse this procedure to install the keyboard. Bottom cover Description Bottom cover (includes battery release latch) Spare part number 753715-001 Before removing the bottom cover, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29). 5. Remove the service cover (see Service cover on page 30). 6. Remove the keyboard (see Keyboard on page 41). NOTE: When replacing the bottom cover, be sure that the NFC board is removed from the defective bottom cover and installed on the replacement bottom cover. See NFC board on page 40 for NFC board removal instructions. Remove the bottom cover: 1. Remove the two Phillips PM2.0×4.4 screws that secure the bottom cover to the computer. 2. Close the computer. 3. Turn the computer upside down, with the rear toward you. 44 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts