HP EliteBook Revolve 810 EliteBook Revolve 810 G3 Maintenance and Service Guid - Page 58
Power button board, Battery, on Service cover, Keyboard, Bottom cover, Speakers
View all HP EliteBook Revolve 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Power button board Description Power button board (includes cable) Spare part number 753718-001 Before removing the power button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29), and then remove the following components: a. Service cover (see Service cover on page 30) b. Keyboard (see Keyboard on page 41) c. Bottom cover (see Bottom cover on page 44) d. Right speaker (see Speakers on page 47) Remove the power button board: 1. Turn the computer right side up, with the front toward you. 2. Open the computer. 3. Release the ZIF connector (1) to which the power button board cable is attached, and then disconnect the power button board cable (2) from the system board. 4. Detach the power button board (3) from the bottom cover. (The button board cable is attached to the bottom cover with double-sided tape.) 5. Close the computer. 6. Turn the computer upside down, with the rear toward you. 48 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts