HP Evo Notebook n620c Compaq Evo Notebook N620c Series Hardware Guide - Page 41
Switching Display and Image (Fn+F4), MultiPort Fn+F2 to Disable. To enable
View all HP Evo Notebook n620c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Pointing Devices and Keyboard 3. Select Device Security. 4. Select MultiPort Fn+F2. The status of the device in the MultiPort is displayed at the bottom of the screen. 5. To change the status of the device in the MultiPort, press the Fn+F2 hotkeys. The device in the MultiPort will remain in the status you select when the Fn+F2 hotkeys are disabled. 6. To disable the Fn+F2 hotkeys, set the status field beside MultiPort Fn+F2 to Disable. (To enable the Fn+F2 hotkeys, set this status field to Enable.) 7. To confirm your settings, press F10. 8. To exit Computer Setup, select an exit option from the File menu, then follow the instructions on the screen. Switching Display and Image (Fn+F4) The Fn+F4 hotkeys switch the image among the display devices connected to the notebook. For example, if an external monitor is connected to the notebook, pressing Fn+F4 switches the image among the notebook display, the external monitor display, and a simultaneous display on both the notebook and the external monitor. Most external monitors receive video information from the notebook using the external VGA video standard. The Fn+F4 hotkeys also switch images among devices receiving video information from the notebook in other ways. The following video transmission types are supported by the Fn+F4 hotkeys: ■ LCD (notebook display) ■ External VGA (most external monitors) ■ S-video (televisions, camcorders, VCRs, and video capture cards with S-video-in jacks) Hardware Guide 3-9