HP Evo n410c Compaq Evo Notebook 410c Series Getting Started - Page 7
external battery pack if attached begin to charge and the, battery light
View all HP Evo n410c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Hardware and Software Setup 5. Turn on the notebook by sliding and momentarily holding, then releasing, the power switch 1. When power is turned on: ❏ The power/standby light 2 turns on. ❏ The battery pack in the primary battery bay and the external battery pack (if attached) begin to charge and the battery light 3 turns on. You are prompted to begin software setup. 1-4 Getting Started
1–4
Getting Started
Hardware and Software Setup
5. Turn on the notebook by sliding and momentarily holding,
then releasing, the power switch
1
.
When power is turned on:
❏
The power/standby light
2
turns on.
❏
The battery pack in the primary battery bay and the
external battery pack (if attached) begin to charge and the
battery light
3
turns on. You are prompted to begin
software setup.