HP Integrity rx2620 HP Integrity Servers with Microsoft Windows Server 2003 Re - Page 26

EBSU changes EFI Boot menu Issue Servers Workaround If EBSU runs from vMedia, it changes the EFI Boot menu Internal Bootable DVD to point to the vMedia device. sx2000, rx8640, rx7640, rx6600, rx3600, rx2660, HP Integrity BL860c Server Blade, HP Integrity BL870c Server Blade Using the EFI Boot Manager, chose Boot Configuration and modify the Internal Bootable DVD menu entry with the correct device path. Foundation Agents Memory leak generated by Foundation Agents Issue Servers Workaround If a hardware communication problem exists with the Baseboard Management Controller (BMC), the Foundation Agents service (cqmghost.exe) might continually increase its memory usage. The underlying Application Programming Interface (API) requests memory and fails to deallocate it during the BMC hardware error condition. All Integrity When unacceptable memory usage is reached, reset the BMC using the MP user interface or restart the Foundation Agent service. If this does not resolve the issue, it might be necessary to contact hardware support. This issue will be resolved in a future release of the HP Smart Setup CD. Hard Disk Configuration Disk configuration lost after reboot Issue Servers Workaround When configuring a boot LUN in EBSU Express Install using a direct connect configuration to an MSA1000, the storage hard disk device configuration may be lost after rebooting the system. All Integrity The Emulex FC EFI driver (minimum rev. 3.11a4) has a Device Discovery delay function. Go to Setup Utility > Configure Boot Parameters and change the Delay Device Discovery parameter to 30. HP c-Class Blade System Infrastructure Onboard Administrator displays wrong CPU Issue Servers Workaround The Onboard Administrator displays wrong CPU information for the c-Class enclosure where the HP Integrity BL860c or BL870c Server Blade resides. It incorrectly reports that the CPU is Dual Core instead of Single Core. HP Integrity BL860c and BL870c Server Blades There is no workaround for this problem. BL870c SAS controller supports only one mirror Issue Servers Workaround The embedded SAS controller on the BL870c Server Blade can only support one mirror. The mirror can be a two-drive mirror or a two-drive mirror with a hot spare. Although there are four total drive bays available in the BL870c, you can use only three of them (maximum) because of this limitation. HP Integrity BL870c Server Blade There is no workaround for this problem. 26 Release 5.5 Overview