HP Integrity rx5670 Windows Integrity nPartition Guide - Page 56
nPartition-level tasks, Boot configuration options for nPartition systems
View all HP Integrity rx5670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Using Other Tools for Managing nPartitions nPartition-level tasks nPartition-level tasks The following section describes tasks you can perform on individual nPartitions within the complex. Boot configuration options for nPartition systems This section briefly discusses the system boot options you can configure on nPartition-capable servers. You can configure boot options that are specific to each nPartition in the server complex. HP Integrity boot configuration options On nPartition-capable HP Integrity servers you must properly specify the ACPI configuration value, which affects the OS startup process and on some servers can affect the shutdown behavior. You can also configure boot device paths and the autoboot setting for the nPartition. Details are given in the following list. • Boot options list You can manage the boot options list for each nPartition either by using the bcfg command at the EFI Shell, or by using the Add a Boot Option, Delete Boot Option(s), and Change Boot Order menu items at the EFI Boot Option Maintenance menu. • Autoboot setting You can configure the autoboot setting for each nPartition either by using the autoboot command at the EFI Shell, or by using the Set Auto Boot TimeOut menu item at the EFI Boot Option Maintenance menu. • ACPI configuration value You must set the proper ACPI configuration for the OS that will be booted on the nPartition. To check the ACPI configuration value, issue the acpiconfig command with no arguments at the EFI Shell. To boot or install the Windows operating system an nPartition must have its ACPI configuration value set to windows. For details, see "ACPI configuration for Windows must be "windows"" on page 65. • ACPI "softpowerdown" configuration-mid-range server OS shutdown behavior On HP rx7620, rx7640, rx8620, and rx8640 servers you can configure the nPartition behavior when an OS is shutdown and halted. The two options are to have hardware power off when the OS is halted, or to have the nPartition be made inactive (all cells are in a boot-is-blocked state). The normal OS shutdown behavior on mid-range servers depends on the ACPI configuration for the nPartition. You can run the acpiconfig command with no arguments to check the current ACPI configuration setting; however, softpowerdown information is displayed only when different from normal behavior. 56 Chapter 4