HP Integrity rx6600 HP Insight Manager WBEM Provider Events Reference - Page 66

An embedded I/O device is missing. Probable Cause: Replaces the I/O card specified

Get HP Integrity rx6600 PDF manuals and user guides View all HP Integrity rx6600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

Event ID Event Severity 9484 Error 9485 Error 9486 Error 9487 Error 9488 Error 9489 Error 9490 Error 9491 Error 9492 Error 9493 Error 9494 Error 9495 Error 9496 Error 9497 Warning Event Description The link between the CC and SBA failed. Probable Cause: See other associated events for the root cause of the failure. WBEM EventID: 961. WBEM ProviderName: FPL_IndicationProvider. The SBA failed and the cell has no I/O. Probable Cause: Cannot configure IO on the cell, probably due to previous errors. Recommended Action: Correct the hardware/software problem indicated by previous errors. WBEM EventID: 962. WBEM ProviderName: FPL_IndicationProvider. The system firmware had an error with the structured error handling mechanism. Probable Cause: Either there is an error in the system firmware or the system firmware has exhausted all resources. Recommended Action: Invalidate NVM or check for newer version of system firmware. WBEM EventID: 963. WBEM ProviderName: FPL_IndicationProvider. Not enough malloc resources for I/O structure error handling. Probable Cause: Either invalidate NVM or check for a new version of system firmware. WBEM EventID: 964. WBEM ProviderName: FPL_IndicationProvider. Unable to create entry for I/O structure error handling. Probable Cause: This is a system firmware error, either invalidate NVM or check for a newer version of system firmware. WBEM EventID: 965. WBEM ProviderName: FPL_IndicationProvider. Unable to bind services for I/O structure exception handling. Probable Cause: This is a system firmware error. Either reset NVM or check for a newer version of system firmware. WBEM EventID: 966. WBEM ProviderName: FPL_IndicationProvider. Error initializing the I/O structure exception handling services. Probable Cause: This is a system firmware error. Either reset NVM or check for a newer version of system firmware. WBEM EventID: 967. WBEM ProviderName: FPL_IndicationProvider. Error initializing structured I/O exception data structures. Probable Cause: This is a system firmware error, there is a conflict with system resources. Either reset NVM or check for a newer version of system firmware. WBEM EventID: 968. WBEM ProviderName: FPL_IndicationProvider. The I/O exception context has an error. Probable Cause: This is a system firmware error. Reset the system, invalidate NVM and reset the system, or check for a newer version of the system firmware. WBEM EventID: 969. WBEM ProviderName: FPL_IndicationProvider. Error creating the internal data and services for the SBA. Probable Cause: This is a system firmware error. Reset the system; invalidate NVM and reset the system; or check for a newer version of system firmware. WBEM EventID: 970. WBEM ProviderName: FPL_IndicationProvider. Error attaching the services to the SBA internal data structures. Probable Cause: This is a system firmware error. Reset the partition; invalidate NVM on the reporting cell and reset the system; or check for a newer version of system firmware. WBEM EventID: 971. WBEM ProviderName: FPL_IndicationProvider. Error initializing the internal SBA data and services. Probable Cause: This is a system firmware error. Reset the partition; invalidate NVM on the reporting cell and reset the partition; or check for newer system firmware. WBEM EventID: 972. WBEM ProviderName: FPL_IndicationProvider. The SBA type is unknown to the system firmware. Probable Cause: This is either a system firmware error, or the wrong I/O is connected to the system. Validate the system recipe both firmware and hardware. WBEM EventID: 973. WBEM ProviderName: FPL_IndicationProvider. An embedded I/O device is missing. Probable Cause: Replaces the I/O card specified by the physical location. WBEM EventID: 974. WBEM ProviderName: FPL_IndicationProvider. 66 WBEM Provider Event Tables

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Event Description
Event
Severity
Event ID
The link between the CC and SBA failed. Probable Cause: See other associated events
for the root cause of the failure. WBEM EventID: 961. WBEM ProviderName:
FPL_IndicationProvider.
Error
9484
The SBA failed and the cell has no I/O. Probable Cause: Cannot configure IO on the
cell, probably due to previous errors. Recommended Action: Correct the
hardware/software problem indicated by previous errors. WBEM EventID: 962.
WBEM ProviderName: FPL_IndicationProvider.
Error
9485
The system firmware had an error with the structured error handling mechanism.
Probable Cause: Either there is an error in the system firmware or the system firmware
has exhausted all resources. Recommended Action: Invalidate NVM or check for
newer version of system firmware. WBEM EventID: 963. WBEM ProviderName:
FPL_IndicationProvider.
Error
9486
Not enough malloc resources for I/O structure error handling. Probable Cause: Either
invalidate NVM or check for a new version of system firmware. WBEM EventID:
964. WBEM ProviderName: FPL_IndicationProvider.
Error
9487
Unable to create entry for I/O structure error handling. Probable Cause: This is a
system firmware error, either invalidate NVM or check for a newer version of system
firmware. WBEM EventID: 965. WBEM ProviderName: FPL_IndicationProvider.
Error
9488
Unable to bind services for I/O structure exception handling. Probable Cause: This
is a system firmware error. Either reset NVM or check for a newer version of system
firmware. WBEM EventID: 966. WBEM ProviderName: FPL_IndicationProvider.
Error
9489
Error initializing the I/O structure exception handling services. Probable Cause: This
is a system firmware error. Either reset NVM or check for a newer version of system
firmware. WBEM EventID: 967. WBEM ProviderName: FPL_IndicationProvider.
Error
9490
Error initializing structured I/O exception data structures. Probable Cause: This is a
system firmware error, there is a conflict with system resources. Either reset NVM
or check for a newer version of system firmware. WBEM EventID: 968. WBEM
ProviderName: FPL_IndicationProvider.
Error
9491
The I/O exception context has an error. Probable Cause: This is a system firmware
error. Reset the system, invalidate NVM and reset the system, or check for a newer
version of the system firmware. WBEM EventID: 969. WBEM ProviderName:
FPL_IndicationProvider.
Error
9492
Error creating the internal data and services for the SBA. Probable Cause: This is a
system firmware error. Reset the system; invalidate NVM and reset the system; or
check for a newer version of system firmware. WBEM EventID: 970. WBEM
ProviderName: FPL_IndicationProvider.
Error
9493
Error attaching the services to the SBA internal data structures. Probable Cause: This
is a system firmware error. Reset the partition; invalidate NVM on the reporting cell
and reset the system; or check for a newer version of system firmware. WBEM
EventID: 971. WBEM ProviderName: FPL_IndicationProvider.
Error
9494
Error initializing the internal SBA data and services. Probable Cause: This is a system
firmware error. Reset the partition; invalidate NVM on the reporting cell and reset
the partition; or check for newer system firmware. WBEM EventID: 972. WBEM
ProviderName: FPL_IndicationProvider.
Error
9495
The SBA type is unknown to the system firmware. Probable Cause: This is either a
system firmware error, or the wrong I/O is connected to the system. Validate the
system recipe both firmware and hardware. WBEM EventID: 973. WBEM
ProviderName: FPL_IndicationProvider.
Error
9496
An embedded I/O device is missing. Probable Cause: Replaces the I/O card specified
by the physical location. WBEM EventID: 974. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9497
66
WBEM Provider Event Tables