HP Integrity rx6600 Rack to Pedestal Conversion Guide - HP Integrity rx6600 Se - Page 15
Installing the Pedestal Kit Sides, Attaching the Bezel Cover
View all HP Integrity rx6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Figure 2-8 Attaching the Bezel Cover Installing the Pedestal Kit Sides The pedestal kit sides are labeled LEFT and RIGHT. Follow these steps to attach the pedestal kit sides. 1. Align the holes in the pedestal kit side with the rivets on the side of the server. NOTE: One of the holes in the pedestal component contains the locking mechanism. This will make the hole appear partially blocked. 2. Hold the pedestal side flush against the server. 3. Slide the pedestal component forward until it locks into place Installing the Pedestal Kit Top Follow these steps to attach the pedestal top. 1. Align the holes in the pedestal top with the rivets on the pedestal kit sides and lower the top onto the server. 2. Slide the pedestal top forward until it locks into place. 3. Secure the pedestal top and sides by hand tightening the two thumb screws into the rear of the server, upper right and left corners. Installing the Pedestal Kit Sides 15