HP Integrity rx6600 Rack to Pedestal Conversion Guide - HP Integrity rx6600 Se - Page 17
Removing the Pedestal Sides, Slide the screwdriver into the lock release slot. See
View all HP Integrity rx6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Figure 3-1 Server Rear 1 2 1 Finger Grips 2 Thumb Screws Removing the Pedestal Sides Follow these steps to remove the pedestal sides. 1. Looking from the bottom locate the lock release slot. 2. Insert a regular (flat head) screwdriver into the lock release slot. See Figure 3-2. 3. Slide the screwdriver into the lock release slot. See Figure 3-4. 4. Pull back on the side. 5. Once the pedestal side has moved about 1/4 inch, the lock will release, and the screwdriver can be removed. 6. Pull the side away from the server. Removing the Pedestal Sides 17
Figure 3-1 Server Rear
1
2
1
Finger
Grips
2
Thumb
Screws
Removing the Pedestal Sides
Follow these steps to remove the pedestal sides.
1.
Looking from the bottom locate the lock release slot.
2.
Insert a regular (flat head) screwdriver into the lock release slot. See
Figure 3-2
.
3.
Slide the screwdriver into the lock release slot. See
Figure 3-4
.
4.
Pull back on the side.
5.
Once the pedestal side has moved about 1/4 inch, the lock will release, and the screwdriver
can be removed.
6.
Pull the side away from the server.
Removing the Pedestal Sides
17